Description
The Heatmiser UH8-N is designed to be used in conjunction with our 12v Network thermostats. The UH8-N provides central switching and is therefore ideally situated next to the underfloor heating manifold.
Eight zones can be controlled as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for boiler making it compatible with almost all boilers. Up to 6 actuators can be connected to each zone. An option is provided to turn the zone 8 into a radiator zone. In this mode the underfloor heating pump, valve and boiler are not enabled when there is a call for heat from zone 8.
Warranty: 2 Year Direct Manufacturer Warranty
KEY FEATURES
———————
Central wiring to up to 8 zone actuators
Output for under-floor heating valve and pump activated when any thermostat calls for heat
Works with our low voltage thermostats.
Output for a single radiator zone
Output for domestic hot water
Low voltage wiring to thermostats.
Network connection to Touchpad
The Heatmiser UH8-N is our central wiring switch box designed to be used with our 12v network thermostats. The UH8-N offers the following functionality:
- Central wiring to up to 8 zone actuators
- Output for under-floor heating valve and pump activated when any thermostat calls for heat
- Works with our low voltage thermostats.
- Output for a single radiator zone
- Output for domestic hot water
- Low voltage wiring to thermostats.
- Network connection to Heatmiser Touchpad
- Actuator outputs: 240V
- DIN Rail Mounting